Washing Machine / Dishwasher "Y" Piece Hose Splitter

£9.9
FREE Shipping

Washing Machine / Dishwasher "Y" Piece Hose Splitter

Washing Machine / Dishwasher "Y" Piece Hose Splitter

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Or you might be able to use self-cutting connectors containing isolating valves, which you can install without draining the pipes.

If your machine is supplied from the pipe that feeds your kitchen tap, the water will be at mains pressure.Furthermore, using an existing wastewater pipe eliminates the reason to have extra unsightly wastewater pipes leaving the exterior wall of your home. A good solution is to run a spur from a socket to a switched fused connection unit above your work surface, and then a cable from this to an unswitched socket below the surface to serve the machine.

The mini stop valve that connects the supply pipe to the machine’s hose lets you isolate the machine without turning off your water. If you’re attaching a plinth across the base of your cabinets, you may need to cut a groove in the top edge to allow the correct door opening. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Ensure the new waste trap is in place, the connecting waste pipes are pushed right down to the collars and move the washers and seals into place.This acts in a similar way to the double-spigot trap but requires less plumbing expertise and might not prove as dirty a task.

You can then fit a 50 cm door to the front of the appliance which neatly covers the carcass and the spacers. We have already purchased an appropriate splitter and would just need this connected to the cold water inlet along with connecting the washing machine to one of the ends of the splitter. The smooth spout and handle design is classy, sophisticated and will add that touch of class that you have been looking for. They save us when we have leaks, fix our plumbing when the heating has packed up, and do hundreds o. Brass 3/4 inch BSP washing machine Y piece / hose connector with a union / loose nut to facilitate easy fitting - connects washing machine and dishwasher to the same valve.

A washing machine is normally connected to the cold and hot water systems, but quite a few will work with just a cold supply while dishwashers usually only need a cold supply. From the trap, the waste pipe must run through your outside wall to a hopper head or gully, or directly into a soil stack.

Before you push your appliance back in, plug it in and run a rinse or quick cycle to check whether there are any leaks. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . Place your dishwasher and washing machine on a firm, level floor or use a spirit level and adjust the feet to make the appliance level to prevent excessive vibrations. These duel nozzle waste traps funnel the wastewater of your washing machine and dishwasher through your sink waste pipe and to the outside drain. Make sure not to push the appliance back against the wall to avoid trapping the drainage hoses or damaging the water supply.

Attach the supply hose to the valve by screwing its cap nut onto the threaded outlet making sure it’s tight. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). If you wish to fit a 45 cm slimline appliance into a 50 cm opening in your cabinets, there’s a separate fitting kit available that allows you to secure the appliance to the cabinets centrally using the 2.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop